HOME > Sistemas > Oscillation Monitor

Tozato Oscillation Monitor

Permanent system for monitoring mold oscillation in real time for continuous casting machines.

Increased lifespan of molds and oscillators

Simultaneous monitoring of all machine axes

Reducing the incidence of breakouts and surface defects

Up to 99 parameters monitored in real time

Três enclausuramentos industriais do sistema Tozato Mold Profilometer (TOM) acoplados em uma linha de lingotamento contínuo de billet com três veios

Overview

Continuous oscillation control for maximum operational stability

The Tozato Oscillation Monitor (TOM) is an online system developed to continuously monitor the behavior of oscillators in continuous casting machines. Using high-precision tri-axial and thermal accelerometer sensors installed directly on the oscillation table, the system tracks trajectory, vibration, and metallurgical parameters in real time, allowing the identification of any operational deviation before it evolves into product defects or machine failures.
Designed for continuous operation in harsh steelmaking environments, the TOM monitors up to 99 parameters simultaneously and is compatible with the main types of oscillators available on the market, including electromechanical, hydraulic, spring-table, vibro-mold, and low-inertia systems. Its graphical software with 3D modeling, configurable alarms, and PLC integration via OPC allows for quick and accurate analysis of real process conditions, helping to reduce breakouts, increase the lifespan of copper molds, decrease surface defects, and optimize continuous casting performance.

APPLICATIONS

Where can TOM be applied?

The Tozato Oscillation Monitor was developed to continuously monitor virtually any type of oscillation system used in continuous casting machines, including:

Regardless of the machine's mechanical configuration, TOM provides reliable data on trajectory, vibration, and metallurgical behavior to aid production and maintenance.

Main Benefits

Much more than monitoring the fluctuation

Breakout Reduction

Anticipate mechanical changes before they cause production accidents.

Surface Quality Control

Monitor parameters that directly influence cracks, wave marks, and surface defects.

Wear Monitoring

Identify wear trends in oscillator components before they affect production.

Predictive Maintenance

Plan interventions based on real data, reducing unexpected downtime.

Copper Mold Lifespan

Reduce excessive friction that accelerates wear on the copper mold.

CASE STUDY

Breakout Reduction

By identifying irregularities or problems in the oscillation in advance, the TOM System provides relevant information so that the maintenance team can make proactive decisions, avoiding unscheduled downtime. As a result, a Tozato customer who implemented TOM in their operation observed an approximately 70% reduction in annual breakout occurrences.
Gráfico de linha azul demonstrando a queda contínua na incidência anual de breakouts de aço após a instalação do sistema TOM (Tozato Mold Profilometer) ao longo dos anos.

Return on Investment

Proven results in operation

US Dollars
0 k
Savings achieved annually due to reduced breakouts reported by a Costumer.
US Dollars
0 k

Saved annually by Costumer factory, thanks to reduced maintenance costs.

US Dollars
0 mi

Cost savings achieved by a Costumer plant by increasing control over the length of billet products.

US Dollars
0 mi

Savings achieved annually by Costumer unit through reduced product downgrading.

US Dollars
0 mi

Obtained annually by Costumer unit as a function of the increase in billet casting speed.

Frequently Asked Questions

What does the Tozato Oscillation Monitor monitor?
TOM continuously monitors the trajectory, vibration, and metallurgical parameters of the continuous casting machine’s oscillators. The system calculates up to 99 parameters in real time, allowing for the identification of mechanical and operational changes before they compromise production.
Can TOM monitor the machine during production?
Yes. The system was developed to operate continuously during ingot casting, performing measurements both in cold machine conditions and during production, without the need to interrupt the process.
Can TOM prevent breakouts?
Yes. By identifying changes in the oscillation table trajectory, vibration problems, misalignments, and metallurgical variations, the system allows for preventive interventions before these conditions evolve into breakouts, perforations, or surface defects. Tozato’s clients have already reported reductions of nearly 70% in the annual incidence of breakouts after implementing continuous monitoring.
Do the sensors withstand the machine's harsh environment?
Yes. The accelerometer sensors are protected by nitrogen- or argon-cooled enclosures and have continuous temperature monitoring, operating normally between 30°C and 50°C. This system ensures a long service life, measurement stability, and dynamic self-calibration according to the operating temperature.
What benefits can be obtained with TOM?

Among the main results are:

  • Breakout reduction;
  • Reduction of surface defects;
  • Increased lifespan of copper molds;
  • Identifying misalignments and mechanical problems;
  • Reducing downtime for maintenance;
  • Complete history of the machine’s condition for predictive maintenance;
  • Greater operational stability and quality in continuous casting;

User reviews

What our customers say about the Tozato Oscillation Monitor

On behalf of the team, I would like to express our gratitude for the opportunity to learn about the Oscillation Monitor. It is always a pleasure to work with the Tozato team, and we look forward to continuing to collaborate to improve our processes.

CMC Logo Qadrado Negativo
CMC Tozato Oscillation Monitor User

The system is performing very well! The sensors always maintain a stable temperature. The accelerometers on the oscillation table don't burn out!

Gerdau Logo Quadrado Negativo
Gerdau Tozato Oscillation Monitor User

We are very satisfied! The sensor temperature never exceeds 48°C. The system is super stable.

Arkansas Steel Associates Logo Quadrado Negativo
ASA Tozato Oscillation Monitor User

Review Text: Before we started using the Tozato Oscillation Monitor, we used to replace our oscillator every six months. Soon after implementing the system, we started replacing it once a year, and today we only need to replace it every two years.

SA Metal Group Logo Quadrado Negativo
SA Metals Tozato Oscillation Monitor User

Speak to a specialist

Our team is ready to understand your needs and recommend the best solution for your operation.
Logo Menu

Tozato is a global provider of technological solutions for the steel industry, bringing more than 20 years of market experience and recognized expertise in continuous casting processes. It offers specialized products, diagnostics, and services that support decision-making and contribute to improved machine performance, internal and external product quality, and the optimization of production and maintenance processes.

Contact

Tennessee, US
Frankfurt, DE
Espírito Santo, BR

+1 731 313 5903
+49 173 193 6067
+55 27 3235 9001

info@tozato.us
info@tozato.com.br

Copyright 2026, Tozato. All rights reserved.